 |
 |
 |
| RY SERIES CENTRIFUGAL HOT OIL PUMP |
I.Brief Introduction
With scientific construction and fine performance,it is used in transporting high temperature liquid without solid particles.And the corrosion-resistant degree and working temperature is depended on the material of the patrs.(The material consists of three kinds:1.HT200;2.ZG230-450;3.1Cr18Ni9Ti;0Cr18Ni12MoTi)
II. Application Scope:
1. Petro-chemical Industry
2. Oil Industry
3. Synthetic-fibre Industry
4. Textile Dyeing And Printing Industry
5. Plastic And Rubber Industry
6. Papermaking Industry
7. Timber Processing Industry
8. Construction And Building Industry
III.Performance Scope of RY Hot Oil Pump
1. Capacity:1¡«500
2. Delivery lift:10¡«125m
3. Temperature:-20¡æ¡«350¡æ
The Sense of The Type RY Hot Oil Pump :Set RY 100-65-200A As The Example:
IV.Construction
With the single grade swing construction.RY hot oil pump consists of two kinde;foot supporting and core-supporting.The entrance of the pump is axial absorbing ,and core stright up for outlet.The pump and the driving motor are installed togetherly at the same seat through elastic coupling .And the whole machine group doesn¡¯t require cooling system.
The main parts include:Pump casign ,Rotor,Bearing,Seal Parts.The pumps connects motor with tri-pawl elasic coupling.
On the whole,this pump reforms the traditional construction,choosing natural cooling type,reducing the volume,simplifing constructure and save carrviing. |
|
|
|
|
 |
 |
|
| |
| |
 |
| address: |
NO.158 Bonan Road
Botou City,Hebei Province,China. |
| post code: |
062150 |
| phone: |
0086-22-58292649 |
| fax: |
0086-22-58292663 |
| E_mail: |
herrychao@tom.com |
|
|
|
