 |
 |
 |
| NYP SERIES INTERNAL GEAR PUMP |
BRIEF INTRODUCTION
NYP series internal gear pump is a kind of new positive displacement pump,and is designed according to the different fields' requirements of petroleum ,chemical industry ,paint ,medicine ,foodstuff and so on.It widly applies to a variety of mediums with different property and viscosity because of special structure and selected different pump's matenrials.
Proper medium temperature:-10℃～200℃(about NYP0.78& NYP2.3:-10℃～80℃)
Proper medium viscosity:1.0cSt～300,000cSt(about NYP0.78 & NYP2.3,1.0cSt～10000cSt)
Type of structure(As gigure)
（1）Work principle
driving gear （outside rotor）with internal tooth drives the internal rotor and turns in same direction in the full closed pump body.The inlet from the outlet.When it turns,negative pressure formed at the suction port,the liquid inlet and being take to the outlet by rotor,then the liquid is impelled from the discharge port and the gears mesh.The transportation of liquid finished.
（2）Structure Feature
As figure I The pumps are mainly composed of internal rotor,outside rotor,shaft,pump casing,front cover,seal,bearing etc.
The pump'seal adopts packing seal or mechanical seal.When the delivered medium is high temperature,high viscosity or strong corrosion,packing seal should be adopted.
When the delivered medium is easy crystallinic ,we can designthe heat preservation jacket in pump casing and front cover in order to melt the medium with steam wen working.The pump can be also fitted with the safty valve.
The pump set is composed of the pump,motor and baseplate.
The driving way is belt wheel driving or coupling driwing.
ADVANTAGES
1)Steady edlivery without pulsation ,little vibration and noise.
2)Outstanding self-priming abitity.
3)The pump can deliver the varied corrosion mediums if the proper material of poarts selected.In addition ,the working temperature can reach 200℃.
4)The same rotary direction of internal rotor and outside rotor results in little wear and long loperation life .
5)The pump's flow capacity can be changed through adjusting the speed.
6)It's specilly suited to deliver high visc medium.
MODEL EXPLANATIONS
|
NYP |
7.0 |
A |
|
|
|
Code of Design Improverment |
[Total 2 Page，Current 1 Page] <<Previous Next>> |
|
|
|
|
 |
 |
|
| |
| |
 |
| address: |
NO.158 Bonan Road
Botou City,Hebei Province,China. |
| post code: |
062150 |
| phone: |
0086-22-58292649 |
| fax: |
0086-22-58292663 |
| E_mail: |
herrychao@tom.com |
|
|
|
